CERAMIK CF-020 Fast-Setting Tile Adhesive

CERAMIK CF-020 Fast-Setting Tile Adhesive

Used for bonding ceramic tiles, stone tiles and terracotta to any dry or wet ceramic substrate.  It can be used on any concrete, render or lime-cement substrate.

Indoor and outdoor. Fast setting allows quick progress of work. Allows foot traffic in 4h.

Category:

FURTHER PRODUCT INFORMATION

FAST-SETTING TILE ADHESIVE (C1FT) (grey)

C-SERIES

Category Characteristics and Requirements
C1

Normal Setting

Cementitious

Adhesive

Tensile strength to exceed 0.5N/mm-2 after 20 minutes open time and after:

  • 28 days under standard conditions (SC=23O + 50% RH)
  • Water immersion – 7 days SC + 21 days water immersion
  • Heat ageing – 14 days SC + 14 days at 70OC + 1 day at SC
  • Freeze Thaw – 7 days SC + 21 days water immersion + 25 Freeze Thaw cycles (+15OC immersed in water to -15OC = 1 cycle) + 1 day SC
C2

Improved

Cementitious

adhesive

Tensile strength to exceed 0.5N/mm-2 after 20 minutes open time and 1.0N/mm-2 after:

  • 28 days under SC
  • Water immersion – 7 days SC + 21 days water immersion
  • Heat ageing – 14 days SC + 14 days cure at 70OC + 1 day at SC
  • Freeze Thaw – 7 days SC + 21 days water immersion + 25 Freeze Thaw cycles + 1 day SC

F-SERIES

Category Optional Characteristics
F

Fast Setting

Tensile strength must be at least 0.5N/mm-2 after 6 hr under SC. Tensile strength to exceed 0.5N/mm-2 after 10 minutes open time
E

Extended Open Time

Tensile strength to exceed 0.5N/mm-2 after 30 minutes open time
T

Reduced slip (Walls)

Tile must slip less than or equal to 0.5 mm after 20 minutes, using a 100mm x 100mm tile weighing 200g
S

Deformability

S1 = 2.5mm < 5mm – Deformable

S2 = ≥ 5mm – Highly Deformable